Connected: An Internet Encyclopedia
3.4.5 Flushing Output
Up:
Connected: An Internet Encyclopedia
Up:
Requests For Comments
Up:
RFC 1123
Up:
3. REMOTE LOGIN -- TELNET PROTOCOL
Up:
3.4 TELNET/USER INTERFACE
Prev: 3.4.4 Non-Default Telnet Contact Port
Next: 3.5. TELNET REQUIREMENTS SUMMARY
3.4.5 Flushing Output
3.4.5 Flushing Output
A User Telnet program SHOULD provide the user the ability to
specify whether or not output should be flushed when an IP is
sent; see Section 3.2.4.
For any output flushing scheme that causes the User Telnet to
flush output locally until a Telnet signal is received from the
Server, there SHOULD be a way for the user to manually restore
normal output, in case the Server fails to send the expected
signal.
Next: 3.5. TELNET REQUIREMENTS SUMMARY
Connected: An Internet Encyclopedia
3.4.5 Flushing Output