Connected: An Internet Encyclopedia
14.26 If-None-Match

Up: Connected: An Internet Encyclopedia
Up: Requests For Comments
Up: RFC 2068
Up: 14 Header Field Definitions
Prev: 14.25 If-Match
Next: 14.27 If-Range

14.26 If-None-Match

14.26 If-None-Match

The If-None-Match request-header field is used with a method to make it conditional. A client that has one or more entities previously obtained from the resource can verify that none of those entities is current by including a list of their associated entity tags in the If-None-Match header field. The purpose of this feature is to allow efficient updates of cached information with a minimum amount of transaction overhead. It is also used, on updating requests, to prevent inadvertent modification of a resource which was not known to exist.

As a special case, the value "*" matches any current entity of the resource.

          If-None-Match = "If-None-Match" ":" ( "*" | 1#entity-tag )

If any of the entity tags match the entity tag of the entity that would have been returned in the response to a similar GET request (without the If-None-Match header) on that resource, or if "*" is given and any current entity exists for that resource, then the server MUST NOT perform the requested method. Instead, if the request method was GET or HEAD, the server SHOULD respond with a 304 (Not Modified) response, including the cache-related entity-header fields (particularly ETag) of one of the entities that matched. For all other request methods, the server MUST respond with a status of 412 (Precondition Failed).

See section 13.3.3 for rules on how to determine if two entity tags match. The weak comparison function can only be used with GET or HEAD requests.

If none of the entity tags match, or if "*" is given and no current entity exists, then the server MAY perform the requested method as if the If-None-Match header field did not exist.

If the request would, without the If-None-Match header field, result in anything other than a 2xx status, then the If-None-Match header MUST be ignored.

The meaning of "If-None-Match: *" is that the method MUST NOT be performed if the representation selected by the origin server (or by a cache, possibly using the Vary mechanism, see section 14.43) exists, and SHOULD be performed if the representation does not exist. This feature may be useful in preventing races between PUT operations.

Examples:

          If-None-Match: "xyzzy"
          If-None-Match: W/"xyzzy"
          If-None-Match: "xyzzy", "r2d2xxxx", "c3piozzzz"
          If-None-Match: W/"xyzzy", W/"r2d2xxxx", W/"c3piozzzz"
          If-None-Match: *



Next: 14.27 If-Range

Connected: An Internet Encyclopedia
14.26 If-None-Match